In sewage treatment, the installation position and installation angle of submersible mixer are very important, and are the key to energy conservation. So what will happen if the installation position and angle of submersible mixer are different? Let's have a look at this article.
The installation position of submersible mixer in the sewage pool is very important. The mixing effect in the sewage pool is obviously different with different installation positions. Sometimes, small power and small diameter submersible mixers can achieve the mixing effect, but due to the wrong installation position, small power submersible mixers may not achieve the mixing effect, and forced to replace high-power submersible mixers, which often leads to waste.
Sometimes, when installed at a certain angle, the mixing effect in the pool is poor, but if the installation angle of the submersible mixer is slightly adjusted, the fluid in the pool may form a good circulation immediately, and the fluid in the pool can be fully stirred. Sometimes, one high-power submersible mixer fails to meet the mixing requirements, but two low-power submersible mixers are installed in the right place to meet the mixing requirements immediately.
It can be seen that the installation angle of the submersible mixer has an impact on the flow field in the pool, the average velocity of the fluid, and the efficiency of the submersible mixer. Therefore, sometimes it is appropriate to tilt the submersible mixer away from the narrow side by an angle to improve the uniformity of fluid mixing in the pool and the efficiency of the submersible mixer.
